banner

Products

Wet Dry Liquid Powder Groove Type Blender Trough Shape Double Paddle Mixer for Pepper

Wet Dry Liquid Powder Groove Type Blender Trough Shape Double Paddle Mixer for Pepper

Trough mixer Equipment introduction The trough type mixer is based on the transmission trough mixer of our company. It h
SHARE

Description

Basic Info
Model NO. CH-50
Working Convection Mixer
Application Powder, Granules
Application Area Food
Layout Type Verticle
Mixing Drum Shape Conical
Additional Capabilities Drying
Operating type Cycle Operating
Condition New
Mixing Power 1.5kw
Weight 180kg
Volum 50 L
Transport Package Wooden Packaging
Specification 1200*400*750mm
Production Capacity 100
Product Description
Trough mixer
ModelCH-50CH-100CH-200CH-400
Volume (L)50100200400
Capacity (kg/batch)2550100200
Mixing motor(kW)1.5345.5
Discharge (kW)0.550.550.751.5
Stirring speed(rpm)24242424
Weight(kg)180300420610
Dimensions (mm)1200*400*7501500*500*9001750*600*10502200*700*1150
Note: there may be minor difference from final dimensions; large volume is also available
Equipment introduction
The trough type mixer is based on the transmission trough mixer of our company. It has made many improvements to the mixing paddle, sealing and unloading, which makes the operation more convenient and the cleaning is more thorough. More widely used.

Equipment principle and characteristics
1. This machine uses two motors, a stirring motor, which drives the mixing paddle to rotate the mixture material through the shaft. A discharge motor can be used to tilt the stirring tank to facilitate unloading.
2. There are one-way thrust ball bearings and radial thrust ball bearings at both ends of the stirring shaft to prevent radial turbulence caused by negative stress.
3. The sealing at both ends of the mixing shaft has been improved, and it can be completely sealed without contaminant material.
4. When jogging is used, it is easy to discharge, and it will not cause the phenomenon that the hopper tilts too much. The left end of the machine rotates. Because the worm wheel and the worm drive have self-locking effect, the mixing box can be dumped at any angle. .
5. Add the raw material to the cylinder at one time, dry it for a period of time, add the adhesive or spray the liquid, or add the raw material and the adhesive to the working container at one time, and mix it into the ideal soft material.

Application
1. Mixing of the previous steps in the production of tablets and granules in the pharmaceutical industry.
2. Mixing of the food industry, such as condiments, dairy products, spices, cakes, etc.
3. Mix of feed production.
4. Mixing of powders and liquids in the chemical industry.

Our Contact